The periodic boiler service is a veritably important job that’s best done in the warmer months of the time, but did you know around 90 of us no way have the boiler serviced.
The boiler for some reason seems to get forgotten until commodity happens, you go to have a shower and find you have no hot water. Also you start to fear trying to find someone to repair the boiler.
So why is the periodic boiler service important?
11 times ago the high effectiveness- condensing boiler came mandatory in the United Kingdom.
With the boilers before condensing it wasn’t as important to have them serviced as it’s now. The reason is that the boilers also didn’t have so numerous corridor inside as they do in moment’s condensing boilers, yes they went wrong but were a lot easier and cheaper to repair, although it has always been a recommendation by the boiler makers to have the boiler and any gas appliance serviced annually.
It’s more important now than ever ahead to have an periodic boiler service and the boiler checked over to make sure it’s performing as should be, and most important that it’s SAFE.
With an periodic boiler service one of the most important checks is the stovepipe pipe, this has to be checked to make sure all joints and seals aren’t oohing carbon monoxide or products of combustion into the room the boiler is located in.
The high effectiveness or condensing boilers as they’re known while running yield condense, this is an acidic water, because it’s acidic, it can start to erode the stovepipe- pipe, and should this be the stovepipe will start to blunder products of combustion ( carbon monoxide), which as we all know can be veritably dangerous to life, this is one of the most important corridor of the service.
All condensing boilers have a condense trap erected in, this needs to be gutted out and checked for leakage it’s also part of the boilers stovepipe system.
When the boiler is running the water it produces cleans the combustion chamber of any residue and this ends up in the trap.
With numerous boilers of moment they work under high pressure and have an expansion vessel connected to the pipe work, this can be either internally or externally.
The expansion vessel will over time will lose pressure and will need to be recharged to keep the boiler working to it’s full efficiently.
The expansion vessel is a veritably important part of the periodic boiler service that needs to be checked. Once the vessel loses the charge it puts pressure on the pump, the internal water corridor and the entire O rings within the boiler.
Have you ever noticed when your boiler is running that the pressure hand either fitted on the boiler or on external pipe starts to rise also when the boiler cools down the pressure drops down to zero. You may indeed have noticed that the discharge pipe or overflow pipe as some people call it, is showing signs of water discharge. If you have also this is typically an suggestion that the expansion vessel has lost its charge. Everyone searches boiler service near me to have easy way.
Part of the periodic boiler service is to check the boiler combustion rate.
This is to make sure the boiler is burning gas as it was designed for, this is carried out using a stovepipe gas analyzer which is fitted into the stovepipe- pipe and a reading is taken, if the readings are within the boilers recommendations also no farther action is needed, but if the readings are out of the recommendations also further examinations are demanded to find the problem.
With the old type of boiler the burners were removed and the stovepipe- ways were gutted and checked, but with the condensing boiler the stovepipe- gas reading tells us when the burners need to be removed. In fact Vaillant boilers now say the burners may no way need to be removed if the boiler is set up and maintained duly, they formerly suggested that the burners be removed every five times.